Konfigurasi DHCP Switch Layer 3 ~ SITI OCTAVIANAH

RBJ	Tittle	:	Konfigurasi DHCP Switch Layer 3
	Issue Date	:	27 September 2016
	Prepare by	:	Siti Octavianah
	Teacher	:	Suyatno, S.Kom
	SMK AL-BAHRI KOTA BEKASI

Menghubungkan antar vlan switch layer 3

tahapan

1. memberi nama vlan

2. memberi ip address

pada vlan 10 dan 20

3. memberikan akses ke port

4. routing pada switch

DHCP switch layer3

tahapan

1. membuat IP pool pada vlan

2. memasukan network

3. memasukan default router

4. memasukan dns name server pada vlan

KONFIGURASI SWITCH

Switch>enable

Switch#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#vlan 10

Switch(config-vlan)#name guru

Switch(config-vlan)#vlan 20

Switch(config-vlan)#name siswa

Switch(config-vlan)#interface vlan 10

%LINK-5-CHANGED: Interface Vlan10, changed state to up

Switch(config-if)#ip address 10.10.10.1 255.255.255.0

Switch(config-if)#interface vlan 20

%LINK-5-CHANGED: Interface Vlan20, changed state to up

Switch(config-if)#ip address 20.20.20.1 255.255.255.0

Switch(config-if)#ip routing

Switch(config)#interface FastEthernet0/1

Switch(config-if)#switchport access vlan 10

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up

Switch(config-if)#interface FastEthernet0/2

Switch(config-if)#switchport access vlan 10

Switch(config-if)#interface FastEthernet0/3

Switch(config-if)#switchport access vlan 10

Switch(config-if)#interface FastEthernet0/4
Switch(config-if)#switchport access vlan 10

Switch(config-if)#interface FastEthernet0/5

Switch(config-if)#switchport access vlan 10

Switch(config-if)#exit

Switch(config)#interface FastEthernet0/6